Prep Works Needed To Apply Powder Coating on Alloy Wheels

Almost like the ceramic coatings, correctly done prep works have a vital role in influencing the powder coating applications process. Now, the powder coatings get electrically bind to the surface it is striking, and so it is extremely effective in removing brake dust, road grime, dirt, grease and all sorts of ground-level contaminants from the set of wheels that promote adhesion.

Powder coating is equally strong in removing the “roach rash”, blemish from the alloy wheel surface, even if the car or the motorbike has been driven by a substantially skilled driver, and has encountered the rogue stone chip or the unexpected scuff.

Despite the damages appearing new or ratty looking – the wheels have to be properly prepped for powder coating, so they have to undergo the necessary prep stages.

The Chemical Soak
In the first prep procedure, the alloy wheels have to be soaked in a specialized heated and agitated chemical stripping solution. After being stripped of contaminants and residue, the aluminium alloy underside of the wheels will be exposed, after it has been rinsed.
Since the professionals are handling the process, so they are aware of using non-toxic chemicals, which will neither be harmful to human health nor the environment. Being efficient powder coaters, they make sure to use earth-friendly systems.

Blake and Blast
Now for exposing the stubborn spots, which the chemical dips might have missed, the alloy wheels are placed in the kiln, once they have been rinsed off. It further helps to expedite drying times. Next, it is shifted on to blasting, the process typically involving aluminium oxide spray using a high-pressure hose for removing the lifted debris to the surface.

In the blasting process, the professionals just use aluminium oxide. The other organic media that quickly get embedded in the softer alloys, like the aluminium, are the walnut shells, and silica or sand beads.

Manual Rash Removal
Blasting removes the most stubborn contaminants from the wheel surface, but it will not work for the deeply grained corrosion and pitting. Neither will blasting impact the rock chips or curb rash. So, the experts use a polishing wheel for shaving off the rough edges, unpleasant accidents and imperfects. Next, the wheels are given milder buffing round.

Tape Time
After buffing and deburring are completed, the thermal tape is applied to the areas for protecting them as they are not to be powder coated. The professionals avoid spraying the whole wheel. They mask off the flat face bolting to the hub for guaranteeing wheels are properly seated.

Before the wheel servicing experts apply powder coating, they ensure removing the dirt, debris and old paint. They use the special solvent for removing chipped and old paint. The total time taken for powder coating is dependent on a few factors, and the wheels’ condition is the chief determinant. Clean and damage freewheel will take about 1 – 2 hours to powder coat each wheel. In case, additional sandblasting and cleaning are needed, then the process will take from 2 to 3 hours.

Which Reasons Make the Smart Car Repairs Smart?

SMART denotes “small to medium area repair technology”, but what is it that has made this repair method “smart”? Now, smart repair technology is the modern high-tech method to repair the cosmetic damages caused to the cars, which includes scuffs, scratches and dents. Smart car repairs technology even maximises the value of the car.

How does the smart car repairs technology exactly work and what are its targeted benefits?
Along with repairing the damages but neither affecting nor replacing the car’s entire parts, SMART repairs technology even favours repairing the car swiftly at a given location.

Owing to the targeted and mobile nature of the Smart car repair service, it even helps in saving a lot of money for the owners compared to the body shop repairs. Even the vehicle warranty is not affected. Through Smart car repairs, the car owners can even avoid making any kind of claims on their insurances while getting done the necessary repairs and maintenance.

• A Specific Area is Targeted
Smart car repair technology is indeed an ideal selection of the external damages encountered by the car, which include scratches, dents and scuffs – since it favours the technicians to conduct their works on the localised areas. It means they are able to avoid repainting the total panels or replace the whole part, but still restore the original factory finish of the car. The specialist technicians have the legal right to do the necessary repairs, without painting them while matching the paint colours with perfection.

• Mobile Services
The Smart car repair service providers even offer the necessary mobile repair services. It indicates the technicians can be summoned to a necessary location for repairing the car, other than having to visit a mobile workshop. The service is absolutely ideal for the auto retailers having short turnaround rates, along with the private customers with a busy schedule, who will be able to get their cars repaired at their convenient location.

• Hours and Not Days
The SMART car repairs do not only avoid the unnecessary huge scale tasks and reach out to an automobile shop, its target approach is significantly reducing the time required in car refurbishment. Using this technology, the technicians can complete the small to medium repairs within a few hours, other than days. Within a few hours, the minor damages will be treated within less a few hours owing to the proper tools, skills and expertise.

• Adding Better Value For Money
Smart car repairs simplify repairing scratches, dents and scuffs significantly. Likewise, the method cost becomes significantly less compared to the traditional body shop repairs. But the lower price does not mean lower quality. Depending on the damage scale, the smart car repairs will leave behind no trace of any accidents or subsequent works. It will seem as if nothing had ever happened. As a result, the sellers can maximise the cosmetically damaged car’s value without having to invest more than its actual worth. As lower is the cost of Smart car repair methods, more will customers forgo claiming on their insurance and save more money in the long run by keeping their earned no claims discounts.

Now to conclude the discussion, it is always right to mention, Smart car repairs is an excellent and sensible alternative to the traditional automobile-shop repairs, while the cars are ensured to be finished to their original factory standards. Finally, they are exceptionally effective, accessible and convenient.

5 Common Driving Mistakes That You Should Avoid

Most of the road accidents occur due to some small and common mistakes. As a driver, not only you obey the traffic rules but also you need to avoid any kind of driving mistake. A small ignorance can create a major accident. So, don’t be casual too much.

 Here are 5 common mistakes that you should avoid while driving.

Using a mobile phone while driving

Using mobile phones while driving is one of the common mistakes. Several road accidents occur every year due to this little mistake. To avoid this, do not take calls or use your mobile when you drive. In case of an emergency, you should stop the car at the roadside and then pick up your phone.

Drive with a damaged wheels

Car wheels can be damaged due to many reasons. They might get bent on the potholes or hit by the curb. Stones, road chips and other solid particles can create scratches on the car wheels. Many people avoid this problem but driving with damaged wheels is a big mistake. If your car has such damaged wheels then surely you will opt for an alloy wheel repair & refurbishment service in London. Alloy wheel experts will restore the original look of your car wheels by advanced refurbishing techniques.

Drive under low tire pressure

Drive under low tire pressure is another common driving mistake. You should check regularly tire pressure indicator on your car dashboard. If it is low then don’t drive your car at this condition. The tire pressure indicator saves you from any accident. You should fill the pressure into the tire at the gas pump as soon as possible.

Not adjusting the side mirrors of your car

Improper adjustment of the side mirror of your car may lead to many accidents. Side mirrors play a vital role while driving. It is highly essential to ensure that the side mirrors are in perfect position. Proper adjustment helps to see the rare portion and side of your car. So, always make your position the mirrors properly before you drive.

Not using the turning indicators

Last but not least, not using the turning indicators can lead to major accidents. Many drivers do not use the indicator lights while turning but it is a big mistake. This is also very dangerous because there is no proper indication. If you do not use these lights then you may face problems while changing lanes.

So, these are the common driving mistakes. Apart from that, there are many mistakes that you are not aware of. Be careful while driving. Small mistakes can make your life risky.

 

 

What Are The Different Types of Car Damages?

There are many factors and reasons that lead to the damage of a car. Based on the type of damage, the repairing process generally varies. Some common types of car damages are alloy wheel damage, dents, suspension damage, bumper damages, brake system damage. In this blog, we will discuss these damages.

1. Alloy wheel damage: Modern cars come with alloy wheels. These wheels are cost-effective and extremely efficient for long-lasting purposes. However, they can be damaged due to many reasons. Excessive driving on rough roads, potholes and other outside elements can damage your alloy wheels. However, all kinds of alloy wheel problems are solved by the alloy wheel repair and refurbishment services. Experts use some advanced technologies to repair alloy wheel damage. Generally, alloy wheel straightening and alloy wheel welding are used to repair the car wheels.
   
2. Dents: Dent is very common car damage. It can be caused by accidents. It is generally classified into 2 different types. They are minor dent and major dent. The minor dent can be done by minor accident and major dent can be done by a severe accident. However, car dents are easily repaired. There are 3 several techniques are used to repair car dents. They include dolly & hammer technique, stud welder technique and dent puller technique. Mechanic generally uses different types of tools such as pushes, hammers etc.
   
3. Suspension Damage: Hertfordshire drivers know how the potholes damage the suspension system of their cars. The system generally consists of shock absorber, ball joint, struts, springs, bushes etc. If they are damaged due to road accidents then they should be completely replaced. In some cases, wheels are also be realigned properly.
   
4. Bumper damages: Bumper damage can occur while parking your car. However, this is a very common car damage. The rare bumper is mostly affected due to this damage. It can also be repaired quickly. Car mechanic generally uses some simple bumper repairing technique to repair this damage.
   
5. Brake system damage: Brake is one of the major components of every vehicle. It can be damaged due to many reasons. However, the main reason is lack of maintenance. So, the braking system should be repaired to avoid severe road accidents. The system consists of the brake pedal, master cylinder, brake pad, disc etc. If one of them is completely damaged then it should be replaced as soon as possible.

These are the major types of car damages. Small damage can create a major problem in your car. So, never avoid any kind of car damage whether it’s minor or major. Repairing and refurbishment are necessary.